 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| KDC-3026 KDC-2026 KDC-226 KDC-126 KDC-126S CD-RECEIVER INSTRUCTION MANUAL (c) B64-2671-00 / 00 (MW) Contents English Safety precautions......................3 About CDs...................................5 General features .........................6 Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Clock Display Adjusting Clock DSI (Disabled System Indicator) Theft Deterrent Faceplate CD/External disc control features ..................................11 Playing CD Playing External Disc Fast Forwarding and Reversing Track Search Album Search Track/Album Repeat Track Scan Random Play Magazine Random Plays Tuner features .............................9 Tuning Mode Tuning CRSC (Clean Reception System Circuit) Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting Accessories ...............................13 Installation Procedure ..............13 Connecting Wires to Terminals ..........................14 Installation ................................15 Troubleshooting Guide .............17 Specifications ...........................20 --2-- Safety precautions 2WARNING To prevent injury or fire, take the following precautions: * Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. * When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. * To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. * If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. * Make sure not to get your fingers caught between the faceplate and the unit. * Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. * Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2CAUTION To prevent damage to the machine, take the following precautions: * Make sure to ground the unit to a negative 12V DC power supply. * Do not open the top or bottom covers of the unit. * Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. * Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. * To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. * Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. * When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. * To prevent a short circuit when replacing a fuse, first disconnect the wiring harness. * Do not place any object between the faceplate and the unit. * Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. IMPORTANT INFORMATION About CD players/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. You can damage both your unit and the CD changer if you connect them incorrectly. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. --3-- English NOTE * If you experience problems during installation, consult your Kenwood dealer. * If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. * Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored. CRSC Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Cleaning the CD Slot As dust tends to accumulate in the CD slot, clean it every once in a while. Your CDs can get scratched if you put them in a dusty CD slot. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. LOUD AUD AME AUTO OFF SCAN RDM REP M.RDM CLK ADJ Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Reset button * Characters in the LCD may become difficult to read in temperatures below 41 F (5 C). * The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. --4-- About CDs Handling CDs * Don't touch the recording surface of the CD. CD cleaning Clean from the center of the disc and move outward. CD storage * Don't place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. * Store CDs in their cases. Removing CDs * CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. * Don't stick tape etc. on the CD. Also, don't use a CD with tape stuck on it. When removing CDs from this unit pull them out horizontally. CDs that can't be used * CDs that aren't round can't be used. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. * CDs with coloring on the recording surface or that are dirty can't be used. * This unit can only play the CDs with . It may not correctly play discs which do not have the mark. * A CD-R or CD-RW that hasn't been finalized can't be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) Burrs Burrs CD accessories Don't use disc type accessories. --5-- General features English Release button (KDC-3026/KDC-2026/KDC-226 only) Power d 4 AM FM Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. CRSC u LOUD Selecting the Source AUD AME AUTO OFF SCAN RDM REP M.RDM CLK ADJ ATT/ LOUD Q/ SRC AUD 1 3 CLK/ ADJ Press the [SRC] button. Source required Tuner CD External disc (Function of the KDC-3026/KDC-2026) Standby (Illumination only mode) Display "TUnE" "CD" "DISC" "STBY" Volume Increasing Volume Press the [u] button. LOUD indicator Decreasing Volume Press the [d] button. Attenuator Turning the volume down quickly. SYSTEM Q indicator Clock display ATT indicator Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF. When it's ON, the "ATT" indicator blinks. Loudness Compensating for low and high tones during low volume. Press the [LOUD] button for at least 1 second. --6-- Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it's ON, "LOUD" indicator is ON. switch as shown below. 4 System Q You can recall the best sound setting preset for different types of the music. 1 2 Select the source to set Press the [SRC] button. Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "FLAT" Rock "ROCK" Top 40 "TP40" Pops "POPS" Jazz "JAZZ" Easy "EASY" * Each setting value is changed with the Adjust the Audio item Press the [4] or [] button. Adjustment Item Display Bass level "BAS" Middle level "MID" Treble level "TRE" Balance "BL" Fader "FD" Exit Audio Control mode Press the [AUD] button. Range -8 -- +8 -8 -- +8 -8 -- +8 Left 15 -- Right 15 Rear 15 -- Front 15 5 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STBY" display. Enter Speaker Setting mode Press the [Q] button. Select the Speaker type Press the [4] or [] button. Each time the button is pressed the below. Speaker type OFF For the OEM speaker For 6 & 6x9 in. speaker For 5 & 4 in. speaker Exit Speaker Setting mode Press the [Q] button. 2 3 Audio Control setting switches as shown Display "SP-F" "SP-O" "SP-6" "SP-5" 1 2 3 Select the source for adjustment Press the [SRC] button. Enter Audio Control mode Press the [AUD] button for at least 1 second. Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted 4 --7-- General features English Clock Display Press the [CLK] button. Each time the button is pressed the clock display turns ON or OFF. Function of the KDC-3026/KDC-2026/KDC-226 Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. * The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. * Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Adjusting Clock 1 2 Select the clock display Press the [CLK] button. Enter clock adjustment mode Press the [ADJ] button for at least 2 seconds. The clock display blinks. Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [] button. 3 Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. 4 Exit clock adjustment mode Press the [CLK] button. Function of the KDC-3026/KDC-2026/KDC-226 DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 1 2 Turn the power OFF Press the [SRC] button for at least 1 second. Set the DSI While pressing the [1] and [3] button, press the [SRC] button. Each time the step 1 and 2 operation is done the DSI turns ON or OFF. --8-- Tuner features Tuning Mode FM/ 4 AM CRSC Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2" Search in order of the stations seek indicator in the Preset memory. Manual -- Normal manual tuning control. CRSC LOUD AUD AME AUTO OFF SCAN RDM REP M.RDM CLK ADJ AUTO/ AME SRC 1-6 Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUnE" display. Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. Tune up or down band Press the [4] or [] button. During reception of stereo stations the "ST" indicator is ON. 2 Band display Preset station number Frequency display 3 ST indicator AUTO indicator CRSC indicator CRSC (Clean Reception System Circuit) Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Press the [CRSC] button for at least 1 second. Each time the button is pressed CRSC turns ON or OFF. When it's ON, the "CRSC" indicator is ON. --9-- Tuner features English Station Preset Memory Putting the station in the memory. Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 2 3 Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [4] or [] button. Put the frequency in the memory Press the [1] -- [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] -- [6] button. 1 2 Turn the power OFF Press the [SRC] button for at least 1 second. Switch the frequency step While pressing the [1] and [5] button, press the [SRC] button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. * When the same operation is repeated, it returns to the original setting. * When the frequency step is switched, the frequencies in the memory are deleted. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 2 Select the band for Auto Memory Entry Press the [FM] or [AM] button. Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 2 Select the band Press the [FM] or [AM] button. Call up the station Press the [1] -- [6] button. -- 10 -- CD/External disc control features Playing CD 0 4 DISC- DISC+ When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator is ON. CRSC LOUD AUD AME AUTO OFF SCAN RDM REP M.RDM CLK ADJ Eject the CD Press the [0] button. 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can cause damage. SRC SCAN RDM REP M.RDM Function of the KDC-3026/KDC-2026 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD-2" CD player "DISC" CD changer/ MD changer * Disc No. 10 is displayed as "0". * The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. SCN indicator RDM indicator Disc number Track number REP indicator IN indicator Track time -- 11 -- CD/External disc control features English Fast Forwarding and Reversing Fast Forwarding Hold down on the [] button. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Release your finger to play the disc at that point. Track Scan Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. 1 Start Track Scan Press the [SCAN] button. "SCN" indicator is ON. Release it when the song you want to listen to is played Press the [SCAN] button. 2 Track Search Selecting the song you want to hear. Press the [4] or [] button. Random Play Playing all the songs on the disc in random order. Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF. When it's ON, the "RDM" indicator is ON and the track number blinks. When the [] button is pressed, the next song select starts. Function of the KDC-3026/KDC-2026 Album Search (Function of disc changer) Selecting the disc you want to hear. Press the [DISC-] or [DISC+] button. Track/Album Repeat Replaying the song/disc you're listening to. Press the [REP] button. Each time the button is pressed the Repeat Play switches as shown below. Repeat play Display Track Repeat "REP" indicator & Track No. blink. Album Repeat "REP" indicator & Disc No. blink. (Function of disc changer) OFF -- Function of the KDC-3026/KDC-2026 Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, the "RDM" indicator is ON and the track and disc number blink. When the [] button is pressed, the next song select starts. -- 12 -- Accessories External view ......... Number of items External view ......... Number of items 2WARNING 1 .........1 2 .........2 3 .........4 If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 2CAUTION 4 .........4 5 .........1 (KDC-3026/KDC-2026/KDC-226 only) The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the - battery. 8. Press the reset button. * If your car's ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. * If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. * If the fuse blows, first make sure the wires aren't touching to cause a short circuit, then replace the old fuse with one with the same rating. * Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. * Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. * When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal * After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. * Mount the unit so that the mounting angle is 30 or less. -- 13 -- Connecting Wires to Terminals English Front left output (White) (KDC-3026 only) 26 Front right output (Red) (KDC-3026 only) 27 Rear left output (White) 23 2 KENWOOD disc changer control input (KDC-3026/2026 only) To connect the Disc changer, consult your Disc changer manual. 3 Fuse (10A) 24 REAR L Rear right output (Red) 28 FM/AM antenna input 1 R If no connections are made, do not let the wire come out from the tab.4 5 When using the optional power amplifier, connect to its power control terminal. P.CONT Wiring harness (Accessory1)25 29 White/Black FRONT * L Power control wire (Blue/White) 15 To front left speaker 30 7 Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. Not Used9 Do not let the wire come out from the tab. 4b Ignition key switch 10 White 32 31 Gray/Black ANT. CONT. Motor antenna control wire (Blue) 17 FRONT * R To front right speaker 33 TEL MUTE Gray 34 35 Green/Black REAR * L To rear left speaker 36 Green 37 38 Purple/Black ACC 13 Ignition wire (Red) 20 REAR * R To rear right speaker 39 Purple 40 Car fuse box (Main fuse) 11 Battery wire (Yellow) 21 Car fuse box 14 + - Ground wire (Black) * (To car chassis) 22 Battery 12 -- 14 -- Installation Installation Firewall or metal support Screw (M4X8) (commercially available) Installing in Japanese-Made Cars 1 2 Refer to the section "Removing the hard rubber frame" (page 16) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N N 8 mm MAX. 8mm MAX. T T/N o5mm 3 o5mm 4 Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. T: Toyota cars N: Nissan cars Accessory3...for Nissan car Accessory4 ...for Toyota car * During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit. * Damage may occur if a screwdriver or similar tool is used with excessive force during the installations. Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Screwing the Faceplate on the Unit (KDC-3026/KDC-2026/KDC-226 only) If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screw (o4 X 16 mm) in the hole shown below. Accessory5 Never insert the taptite screw (o4 x 16 mm) in any other screw hole than the one specified. If you screw it in another hole, it will contact and may cause damage to the mechanical parts inside the unit. -- 15 -- Installation English Removing the hard rubber frame Removing the Unit 1 Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. 1 2 3 Refer to the section "Removing the hard rubber frame" and then remove the hard rubber frame. Remove the screw (M4 x 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown. Catch Lock Accessory2 Removal tool Screw (M4X8) (commercially available) Accessory2 Removal tool 2 When the lower level is removed, remove the upper two locations. 4 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Be careful to avoid injury from the catch pins on the removal tool. 5 The frame can be removed from the top side in the same manner. Pull the unit all the way out with your hands, being careful not to drop it. -- 16 -- Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The sound quality is poor or distorted.25 One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. The speakers are not wired correctly.27 Reconnect the speaker wires so that each output terminal is connected to a different speaker. ? The power does not turn ON.01 The fuse has blown. After checking for short circuits in the wires, replace the fuse with one with the same rating. No ACC position on vehicle ignition.02 Connect the same wire to the ignition as the battery wire. ? The Touch Sensor Tone doesn't sound.34 The preout jack is being used. The Touch Sensor Tone can't be output from the preout jack. Tuner source ? ? ? Nothing happens when the buttons are pressed.04 The computer chip in the unit is not functioning normally. Press the reset button on the unit (page 4). There's a source you can't switch.06 There's no CD inserted. Set the media you want to listen to. If there's no media in this unit, you can't swhich to each source. The memory is erased when the ignition is turned OFF.10 The battery wire has not been connected to the proper terminal. Connect the wire correctly, referring to the section on Radio reception is poor.39 The car antenna is not extended. Pull the antenna out all the way. The antenna control wire is not connected.40 Connect the wire correctly, referring to the section on ? ? Even if Loudness is turned ON, high-pitched tone isn't compensated for. 17 Tuner source is selected. High-pitched tone isn't compensated for when in Tuner source. No sound can be heard, or the volume is low. The fader or balance settings are set all the way to one side.21 Center the fader and balance settings. The input/output wires or wiring harness are connected incorrectly.22 Reconnect the input/output wires or the wiring harness correctly. See the section on ? -- 17 -- Troubleshooting Guide English Disc source ? ? "AVin" is displayed without achieving External disc control mode.50 Unsupported disc changer is connected.51 Use the disc changer mentioned in the IMPORTANT INFORMATION of the section on Can't remove disc.64 The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. There's already another disc inserted. Press the [0] button and remove the disc. ? ?The disc won't insert.65 ?Track Search can't be done.66-2 For the albums first or last song. For each album, Track Search can't be done in the backward direction for the first song or in the forward direction for the last song. ? ? The specified track will not play.58 Random play or magazine random play has been selected. Turn off random play or magazine random play. Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves.59 The setting is not canceled. The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. Cannot play CD-R or CD-RW.60 Finalization processing is not being conducted for CD-R/CD-RW. Conduct finalization processing with CD recorder. A non-compatible CD changer is being used to play the CD-R/CDRW.61 Use a CD changer compatible with CD-R/CD-RW to play. If the following situations, consult your nearest service center: * Even though the disc changer is connected, the Disc Changer source is not ON, with "AVin" showing in the display during the Changer Mode. * Even though no device (KCA-S210A, CA-C1AX, KDC-CPS89, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the Auxiliary input is entered when switching modes. ? ? A CD ejects as soon as it is loaded.62 The CD is upside-down. Load the CD with the labeled side up. The CD is quite dirty.63 Clean the CD, referring to the section on -- 18 -- The messages shown below display your systems condition. E-01: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01 Load the disc magazine properly. No CD in the unit. Insert the CD. No disc has been loaded in the disc magazine.E02 Load a disc into the disc magazine. No disc has been loaded in the disc magazine.E04 Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. Clean the CD and load it correctly. Nothing has been recorded on the MD.E10 No tracks are recorded on the MD, although it has a title.E11 The faceplate of the slave unit being connected to this unit has been removed.E30 Replace it. The unit is malfunctioning for some reason.E77 Press the reset button on the unit. If the "E- 77" E-0d: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60C (140F), stopping all operation.E0d Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60C (140F), the disc will start playing again. Discs are being exchanged in the Disc changer.E57 The CD player section is not operating properly.E59 Reinsert the CD. If the CD cannot be ejected or the E-02: E-04: LOAd: IN (Blink): display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. E-10: E-11: E-12: E-77: code does not disappear, consult your nearest service center. E-99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.E99 Check the disc magazine. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. -- 19 -- Specifications English Specifications subject to change without notice. FM tuner section Frequency range (200 kHz space) ............87.9 MHz - 107.9 MHz Frequency range (50 kHz space) ..............87.5 MHz - 108.0 MHz Usable sensitivity (S/N = 30dB) ....................9.3dBf (0.8 V/75 ) Quieting Sensitivity (S/N = 50dB) ...............15.2dBf (1.6 V/75 ) Frequency response (3 dB) .................................30 Hz - 15 kHz Signal to Noise ratio (MONO) ..............................................70 dB Selectivity (400 kHz)....................................................... 80 dB Stereo separation (1 kHz) ....................................................40 dB Audio section Maximum output power KDC-3026/2026 .........................................................50 W x 4 KDC-226/126/126S ....................................................45 W x 4 Full Bandwidth Power (at less than 1% THD) ................22 W x 4 Tone action Bass : ...............................................................100 Hz 10 dB Middle : ..............................................................1 kHz 10 dB Treble : .............................................................10 kHz 10 dB Preout level / Load (during disc play)....................2000 mV/10 k Preout impedance ............................................................ 600 AM tuner section Frequency range (10 kHz space) ...................530 kHz - 1700 kHz Frequency range (9 kHz space) .....................531 kHz - 1611 kHz Usable sensitivity (S/N = 20dB) .............................28 dB (25 V) General Operating voltage (11 - 16V allowable) ..............................14.4 V Current consumption.............................................................10 A Installation Size (W x H x D) ..........................182 x 53 x 155 mm 7-3/16 x 2-1/16 x 6-1/10 inch Weight...................................................................3.1 lbs (1.4 kg) CD player section Laser diode .......................................................................GaAlAs Digital filter (D/A)......................................8 Times Over Sampling D/A Converter .......................................................................1 Bit Spindle speed ...............................................500 - 200 rpm (CLV) Wow & Flutter........................................Below Measurable Limit Frequency response (1 dB) .................................10 Hz - 20 kHz Total harmonic distortion (1 kHz) ......................................0.01 % Signal to Noise ratio (1 kHz) ................................................93 dB Dynamic range ....................................................................93 dB Channel separation..............................................................85 dB -- 20 -- |
Price & Availability of KDC-2026
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |